DIN 1.2367 Die Steel

Hot work tool steel

DIN 1.2367 Die Steel
DIN 1.2367 Die Steel
DIN 1.2367 Die Steel
DIN 1.2367 Die Steel
DIN 1.2367 Die Steel
DIN 1.2367 Die Steel
Inquiry to this products
Tel: 86 - 574 - 55711809
E-mail: info@nngsteel.com
whatsapp:
Wechat: info@nngsteel.com
Skype:
Detail
Description
What we can offer
Packing & Shipping
Description
DIN 1.2367 Die Steel for Hot Forging or Die Casting Mold
 
Chemical Composition (%)

C

Si

Mn

P

S

Cr

Mo

V

0.35
0.40

0.30
0.50

0.30
0.60


0.030


0.020

4.70
5.20

2.70
3.30

0.40
0.70

 
Dimensions

Shape

Thick / Dia. (mm)

Width (mm)

Round

8-600

/

Flat

6-200

20-910

Block

150-500

200-1000

 
Delivery Condition
EAF+LF+VD+(ESR), Hot rolled or Forged, Spheroidizing Annealed, Hardness≤229HB, Un-machined or Machined (Peeled, Turned, Milled, Grinded), UT 100% Passed
 
Characteristics
1. Chrome–molybdenum–vanadium steel for hardening in oil and in air with very good hardenability,
high firmness during the heat and resistance to the tempering
2. Very good toughness and plastic properties during normal and also higher temperatures.
3. Very good resistance to tearing of thermal fatigue and low sensitivity to quick changes of temperature. The steel is appropriate for the heat treatment also for firmness over 1800N/mm2 and for tools cooled
by water. It is well-workable during the heat and well-workable in the soft-annealed state. 
 
Applications
1. For molds for firm and movable core parts and other parts of molds for pressure casting of aluminum alloys and large series of castings of zinc and magnesium alloys.
2. Tools for hot mechanical working, i.e. highly stressed small and middle-sized dies and inserts of dies. Dies, thorns, jaws and punches especially with the high firmness over 1800N/mm2 cooled by water.
3. Highly stressed extruders and other auxiliary tools for extrusion of non-ferrous metals during the heat, extrusion dies for aluminum and its alloys. Tools for hot cutting, e.g. small or middle-sized shear blades, trimming dies and cutting thorns.
 
Heat Treatment
Annealing
750 to 800°C (1382 to 1472°F)
Slow controlled cooling in furnace at a rate of 10 to 20°C/hr (50 to 68°F/hr) down to approx. 600°C (1112°F), further cooling in air. Hardness after annealing: max. 229 HB.
           
Stress relieving
600 to 650°C (1112 to 1202°F)
Slow cooling in furnace; intended to relieve stresses set up by extensive machining, or in complex shapes. After through heating, hold in neutral atmosphere for 1 - 2 hours.
 
Hardening
1030 to 1080°C (1886 to 1976°F)
Oil, salt bath (500 - 550°C / 932-1022°F), air
Holding time after temperature equalization: 15 to 30 minutes.
Obtainable hardness:
52 - 56 HRC in oil or salt bath,
50 - 54 HRC in air.
 
Tempering
Slow heating to tempering temperature immediately after hardening / time in furnace 1 hour for each 20 mm of work piece thickness, but at least 2 hours / cooling in air. It is recommended to temper at least twice.
A third tempering cycle for the purpose of stress relieving may be advantageous.
1st tempering approx. 30°C (86°F) above maximum secondary hardness.
2nd tempering to desired working hardness.
The tempering chart shows average tempered hardness values.
3rd for stress relieving at a temperature 30 - 50°C (86 to 122°F) be low highest tempering temperature.
 
What we can offer
What we can offer?
 
We offer a wide range of steel products in a wide variety of dimensions and executions, acc.to the common international specifications or customerized.
Machining and heat treatment are available.
Also, we advise you in choosing the right materials.
 
Shape Available
Solid round bar
Flat bar
Square bar
Hexagon bar
Block
Plate
Sheet
Wire rod
Strip

 

AISI

DIN

JIS

Stock

Application

Hot Work Tool Steel

H11

1.2343

SKD6

Die Casting Dies,Extrusion Dies, Hammer Dies,
Ram Dies,
Forging Dies
etc.

H13

1.2344

SKD61

H10

1.2365

SKD7

 

——

1.2367

——

 

L6

1.2714 / 1.2713

SKT4

H12

1.2606

SKD62

 

H21

1.2581

SKD5

Cold Work Tool Steel

D3

1.2080

SKD1

Cutting Tools, Punching Tools, Shear Bladers, Reamers, Thread Rolling Dies, Calipers, Sockets etc.

——

1.2601

~SKD11

D2

1.2379

~SKD11

——

1.2379 MOD

DC53 (Daido)

D6

1.2436

——

 

O1

1.2510

SKS3

O2

1.2842

——

 

A2

1.2363

SKD12

 

S1

1.2550

——

 

S7

1.2357

——

 

——

1.2767

SKT6

 

L2

1.2210

——

 

Plastic
Mould Steel

P20

1.2311

——

      Mold Base,           Core & Cavity,         Bumper Mold             etc.         

P20+Ni

1.2738

——

P20+S

1.2312

——

——

1.2316

——

 

420

1.2083

SUS420J2

——

——

NAK80 (Daido)

Alloy Steel

4120

25CrMo4 / 1.7218

SCM420

 

Shafts, Gears, Drillers, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Crankshafts, Connecting Rods, Came, Couplings  etc.

4135

34CrMo4 / 1.7220

SCM435

 

4130

34CrMo4 / 1.7220

SCM430

4140

   42CrMo4 /        42CrMoS4 /                1.7225             

SCM440

4142

41CrMo4 / 1.7223

SCM440

 

4145H

——

——

 

4330V

——

——

 

4340

34CrNiMo6 / 1.6582

SNCM439

 

5115

16MnCr5 / 16MnCrS5 / 1.7131

 

 

5120

20MnCr5 / 20MnCrS5 / 1.7147

SMnC420H

 

5140

41Cr4 / 41CrS4 / 1.7035

SCr440

8620

21NiCrMo2 / 1.6523

SNCM220

 

8640

40NiCrMo2-2 / 1.6546

SNCM240

 

——

18CrNiMo7-6 / 17CrNiMo6 / 1.6587

——

 

9840

36CrNiMo4 / 1.6511

——

 

E71400

41CrAlMo7-10 / 1.8509

SACM1

 

——

34CrAlNi7 / 1.8550

——

 

Bearing Steel

E52100

100Cr6 / 1.3505

SUJ2

Bearing, Shafts
etc.

——

100CrMn6 / 1.3520

——

 

——

100CrMo7-3 / 1.3536

——

 

Spring Steel

5155

55Cr3 / 1.7176

SUP9

 

Springs

6150

51CrV4 / 1.8159

SUP10

 

9261

60CrSi7 / 1.7108

——

 

Carbon Steel

1010

CK10 / C10E / 1.1121

S10C

 

Shafts, Chains, Bolts, Nuts, Pins, Suds, Keys, Bites, Came, Couplings  etc.

1020

C22 / 1.0402

S20C

1040

CK40 / C40E / 1.1186

S40C

1045

CK45 / C45E / 1.1191

S45C

1050

CK50 / C50E / 1.1206

S50C

1055

CK55 / C55E / 1.1203

S55C

 

1064

CK60 / C60E / 1.1221

S58C

 

High Speed Tool Steel

M2

1.3343

SKH51

Reamer,
      End-mill,         
Hob, Cutter, Bite, Drill, Punch, Tap, Brooch
etc.

M7

1.3348

——

 

M42

1.3247

SKH59

M35

1.3243

SKH55

T1

1.3355

SKH2

 

T15

1.3202

——

 

T42

1.3207

SKH57

 

 
Note:
1). √ means we have stoc
2). Delivery Condition:
Smelting: EAF+LF+VD (+ESR)
Making: Hot rolled, Cold rolled, Forged, Cold Drawn
Heat Treatment: Untreated, Annealing, N+T, Q+T
Surface: Black, Peeled, Turned, Milled, Grinded, Polished
 
Packing & Shipping
Hot keywords:high quality
Leave Messages
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
Please Feel free to give your inquiry in the form below.We will reply you in 24 hours.
Name*
Country*
Company Name
*Email
Product You Want
code
Submit
Refill
Related Articles:
Product Catalog